SB-250U-01_Photo_Side_For Tab

All Sullivan 3Ø Alternators can be used as Starter-Alternators if;
○ Alternator is capable of creating enough torque for the engine.
○ The Battery can provide enough current to the Alternator.
○ The proper wiring allowing the controller to be installed.
○ A Starter Controller is installed on-board.


Handheld starter from Sullivan

SSRC

SSRC’s are Voltage Regulators, which provide power over a wide RPM range reducing the amount of time using the backup batteries, with an additional starting module. With either a 5V Signal or a momentary switch they offer remote starting when combined with one of our Alternators.

SSRC

Model Number Primary Output Secondary Output Tertiary Output Alternator Input
SSRC-500C-10 24 VDC to 15 VDC, 12.5A/350W 12 VDC to 15 VDC, 9A/108W 4.8 VDC to 8 VDC, 8A/42W 29 VAC to 90 VAC
SSRCE-400C-03 24 VDC to 28 VDC, 12.5A/320W 12 VDC to 15 VDC, 9A/100W 4.8 VDC to 8 VDC, 8A/50W 29 VAC to 90 VAC


SB-250U-01_Photo_Side_For Tab

Starter-Controller

An external starting box is used to crank an engine fitting with a Sullivan Starter-Alternator without carrying onboard starting batteries. This can save significant weight in the vehicle, as well as allow for safe and reliable starting.

Starter-Controller

Model Number Starting Current Weight Dimensions Storage Temperature
SB-250U-01 200A Max Surge/75A Max Continuous 2.7 kg/9.8 kg with Batteries 300 mm x 248 mm x 232 mm -40°C to 85°C
SC-200U-01 200A Max Surge/75A Max Continuous 1.1 kg 230 mm x 70 mm x 70 mm -40°C to 85°C